Full Face Motorcycle

Icon Airflite DLX Rubatone Black Full Face Motorcycle Helmet + Red Shield Visor

Icon Airflite DLX Rubatone Black Full Face Motorcycle Helmet + Red Shield Visor

Icon Airflite DLX Rubatone Black Full Face Motorcycle Helmet + Red Shield Visor   Icon Airflite DLX Rubatone Black Full Face Motorcycle Helmet + Red Shield Visor

We will continue to send out orders in a timely manner and will strive to answer all messages related to products, sizes etc. If we haven't yet answered your message, please do not send another one with the same question as this will delay responses to other customers - our current response time is around 8 hours.

We thank each and every one of you for keeping us going through these hard times and appreciate your understanding on this matter. This Deluxe helmet comes pre-fitted with a clear Icon Fliteshield. You will receive an additional Icon Fliteshield in RST Red in the helmet's box.

Icon Airflite DLX Rubatone Helmet - Red Edition. Injection-molded polycarbonate shell for strength. Multiple oversized intake and exhaust ports are strategically placed to keep you cool and comfortable, including four intake vents, MX-inspired chinbar vent and two exhaust ports that channel air between the comfort liner and the protective, energy-absorbing EPS foam liner. Quick-change, fog-free outer Fliteshield keeps debris away, while the internal, interchangeable DropShield keeps the sun in check with a flip of a switch. Removable molded breath deflector and chin curtain.

Moisture-wicking Hydradry interior is fully removable and washable. Both wind drag and weight are decreased by sculpting the traditional neckline of the Airflite to avoid jacket or suit interference.

6 3/8 - 6 1/2. 6 5/8 - 6 3/4. 7 1/8 - 7 1/4.

7 3/8 - 7 1/2. 7 5/8 - 7 3/4. 8 1/8 - 8 1/4. 20 1/8 - 20 1/2.

20 7/8 - 21 1/4. 22 3/8 - 22 3/4. 23 1/8 - 23 1/2. 24 3/4 - 25 1/8. Choosing the correct size helmet Helmet fit is critical to helmet protective performance. The correct helmet size can only be checked and confirmed by physically fitting the helmet to the user. Always try the helmet on before purchasing it, to be sure you are purchasing the correct sized helmet for you.

Head measurement instructions Wrap a flexible tape measure around your head approximately one inch above the eyebrows and ears. Use this measurement (in either inches or centimeters) to find your helmet size. Helmet sizing information To achieve proper helmet fitment, begin by finding your head circumference size using the method described above. Remember that the helmet size you choose should fit around the crown of your head comfortably with no pressure points. The cheekpads should fit firmly around your face.

Once your chin strap is fastened, grab the chin bar of the helmet and move it side to side. Your cheeks should move with the helmet, which should not slide across your face. Care Instructions Lets face it, Icon® helmets look cool and you want to keep them that way. Weve found the following methods work really well to keep our helmets looking sharp and ready to roll.

Remember, never use gas, pre-mix, carb cleaner, brake cleaner or any other random unlabeled spray can lying around the garage. Chemicals and harsh solvents can break down the materials in your helmet; its like using brake cleaner to polish your plasticsdont do it!

Remove interior lining as shown on page 10 of the User Manual. Soak your interior in a mild solution of baby shampoo. Rinse in clean water several times until all soap is gone. Let interior air dry and replace accordingly. Never machine wash or dry your helmet interior. Shield Cleaning Your helmet is equipped with a scratch resistant fog free shield. Common household cleaners such as glass cleaners, surface cleaners, and furniture cleaners, can leave behind unwanted residues, or in some extreme cases damage the shield itself. It is our recommendation the same steps outlined above for cleaning the exterior of your helmet should be applied to cleaning the exterior of your shield. Use no cleaners or detergents on the inside of your shield. Using anything other than a clean soft cloth, micro fiber cloth, or the bag supplied with your helmet, will ruin or reduce the effectiveness of the fog free coating.

Storage It is a good idea to protect your helmet if it is stored for a period of time. Store your helmet inside the helmet bag we have provided in a secure, dry place out of direct exposure to sunlight. Lay a warm, wet, cloth towel on the exterior of the helmet for at least 5 minutes to soften dried on bugs.

Don't skip this step! Using a fresh, wet, clean cloth and mild dish soap wipe down the exterior to get ride of road grime and softened bug guts. Use another fresh dry cloth towel to dry the helmet and get rid of any water spots. Remove the now softened bugs and road grime with a light blotting action.

For this use the soft part of your helmet bag provided or a clean microfiber cloth. Never rub aggressively with anything on the Rubatone or you can ruin the finish. For gloss helmet finishes, use spray automotive wax that is specifically designed for cars with a clear coat. Available at any automotive store.

For matte finishes, you know better than to polish a matte finish dont you? One Impact Rule - Any helmet that has sustained an impact should be replaced. Helmets are designed to absorb only one impact.

The helmet is designed to absorb some shock by partial destruction of the shell and liner. After your helmet has endured any impact, the impact absorption liner portion of your helmet will have dispersed the energy from that impact, thus rendering the liner compacted and, therefore, compromised. This damage may not be visible. Even if there is no VISIBLE damage to the shell, the helmets usefulness is expired after one impact. A helmet that has experienced an impact should be destroyed and replaced, even if it is apparently undamaged. Obsolesence and Helmet Disposal - A helmet has a limited lifespan in use and should be replaced when it shows obvious signs of wear, e. Change of fit, cracks, rust, fraying or other signs of normal wear and tear that can contribute to helmet degradation. The item "Icon Airflite DLX Rubatone Black Full Face Motorcycle Helmet + Red Shield Visor" is in sale since Tuesday, December 3, 2019. This item is in the category "Vehicle Parts & Accessories\Clothing, Helmets & Protection\Helmets & Headwear\Helmets".

The seller is "pistonoids" and is located in Wolvey. This item can be shipped worldwide.

  • Bundle Description: Additonal Visor(s)
  • Model: Airflite
  • Shell Construction: Thermo-Resin
  • Shell Sizes: 3
  • Design: Graphic
  • Sharp Rating: 3 Star
  • Features: Integrated Sun Visor
  • Exact Colour: Rubatone Black
  • Main Colour: Black
  • Use: Motorcycle
  • Style: Full Face
  • Gender: Unisex Adult
  • Brand: Icon
  • Finish: Matt
  • Weight Range: 1600 - 1799 g
  • Custom Bundle: Yes

Icon Airflite DLX Rubatone Black Full Face Motorcycle Helmet + Red Shield Visor   Icon Airflite DLX Rubatone Black Full Face Motorcycle Helmet + Red Shield Visor